全文获取类型
收费全文 | 1102篇 |
免费 | 139篇 |
国内免费 | 735篇 |
专业分类
安全科学 | 73篇 |
废物处理 | 117篇 |
环保管理 | 97篇 |
综合类 | 1145篇 |
基础理论 | 174篇 |
污染及防治 | 338篇 |
评价与监测 | 26篇 |
社会与环境 | 3篇 |
灾害及防治 | 3篇 |
出版年
2023年 | 13篇 |
2022年 | 25篇 |
2021年 | 27篇 |
2020年 | 44篇 |
2019年 | 59篇 |
2018年 | 48篇 |
2017年 | 47篇 |
2016年 | 64篇 |
2015年 | 100篇 |
2014年 | 109篇 |
2013年 | 106篇 |
2012年 | 140篇 |
2011年 | 120篇 |
2010年 | 104篇 |
2009年 | 123篇 |
2008年 | 82篇 |
2007年 | 150篇 |
2006年 | 130篇 |
2005年 | 96篇 |
2004年 | 67篇 |
2003年 | 58篇 |
2002年 | 52篇 |
2001年 | 45篇 |
2000年 | 30篇 |
1999年 | 22篇 |
1998年 | 34篇 |
1997年 | 23篇 |
1996年 | 11篇 |
1995年 | 7篇 |
1994年 | 5篇 |
1993年 | 20篇 |
1992年 | 3篇 |
1991年 | 6篇 |
1988年 | 2篇 |
1987年 | 1篇 |
1986年 | 1篇 |
1985年 | 1篇 |
1981年 | 1篇 |
排序方式: 共有1976条查询结果,搜索用时 15 毫秒
101.
102.
荷电超滤膜对天然有机物去除及膜污染行为的影响 总被引:2,自引:1,他引:1
以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考. 相似文献
103.
臭氧/混凝预处理工艺降低膜污染的研究 总被引:1,自引:0,他引:1
采用臭氧和混凝工艺分别处理黄浦江原水后进行MF膜过滤试验,考察2种预处理工艺对有机物的作用,进而考察其对MF膜过滤特性的影响.结果表明,2种预处理工艺都存在一个使膜污染下降率达到最大的最佳投药量.2种预处理工艺中,混凝降低膜污染的效果要好于臭氧,这主要与2种预处理工艺所去除的有机物性质有关.黄浦江水中有机物相对分子质量主要集中在3×103~5×103范围内,膜化学清洗液的分析表明造成膜污染的有机物相对分子质量主要集中在4.5×103附近,臭氧对相对分子质量在3×103附近的有机物去除效果较好,而混凝主要去除5×103附近的较大相对分子质量的有机物,因而混凝对这部分污染膜物质的去除效果要好于臭氧,从而有效降低了膜污染. 相似文献
104.
105.
106.
印钞废水属高浓度难降解有机废水,对环境污染严重。鉴于现有处理工艺出水普遍不达标的情况,通过对比实验确定了改进方案:超滤浓缩液离心出水在进入接触氧化池前,增加新的处理单元(Fenton氧化-混凝)。Fenton氧化最佳条件:FeSO4.7H2O投加量14 g/L,H2O2的投加量34 mL/L,初始pH值6.0,氧化反应时间1.5h,温度18.8℃;混凝过程最佳条件:PAC投加量4 g/L,PAM(5‰)投加量10 mg/L,pH值7。新增单元对废水中COD去除率接近80%,可生化性提高1.6倍,色度降低36%。 相似文献
107.
Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich
water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best
performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could
eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by
Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the
membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants
from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L
NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane
surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the
other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface. 相似文献
108.
109.
110.